The only pocket meter that directly measures conductivity and total dissolved solids (TDS) in 0.12ml sample. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
Minimum sample volume: 0.12ml
Up to 3 calibration points
Conductivity, TDS, and temperature display
Auto range
Auto calibration
Auto standard recognition: 1413µS/cm, 12.88mS/cm, 111.8mS/cm
Auto temperature compensation: 2%/ºC fixed
Temperature calibration: 5 to 40.0 ºC
4 Total dissolved solids curves: TDS Factor 0.4 to 1.0, EN 27888, 442, NaCl
Auto stable / auto hold measurement
Auto power off: 30 mins.
Low battery indicator
IP67 Rating dust & waterproof
Replaceable sensor
400 Hours battery life: continuous use without backlight
Materials: ABS epoxy body & titanium coated with platinum black sensor
Display: custom (monochrome) LCD with backlight
Operating conditions: 5 to 40°C, 85% or less relative humidity
Warranty: 2 years - meter, 6 months - sensor
Packed in handy carrying case
Supplied with 1413µS/cm & 12.88mS/cm conductivity standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals